The way I put the frame together was to tack each side up first. Then I compared the two sides laying on top of one another and then squared it up. Then I finished up enough of the weld so that it would remain square. I then placed the cross pieces (named "width" above) and tacked, squared it up and finished them up. I then finished up the remaining welds.
Casters were purchased and welded directly to the bottom of the frame to make it easy to move into my storage.
Go Back to Parts List | Go on to Burner- Mash Tun
|Overview||The Mash Tun||Brewery stand||Hot Liquor Tank||Boil Kettle, Hopback and Cooling|
|Control Panel||Computer Control and data acquisition||Grain Mill||Draught Beer Cooler||HOME|