General design and assumptions


All stainless tubing construction

I don’t want the brewery too tall that you would require a ladder to get to the top of it.

It had to be slim enough to be put away in the limited space I have downstairs.

It also cant be too top heavy and should make some provisions for safety to not be able to knock it over.

It had to have mount points for the burners, pumps, grain mill, propane regulators and a control panel.

It had to be mobile with some sort of wheels but it had to also be stable (see above)

Go Back to The Stand | Go on to Orignal Design

Overview The Mash Tun Brewery stand Hot Liquor Tank Boil Kettle, Hopback and Cooling
Control Panel Computer Control and data acquisition Grain Mill Draught Beer Cooler HOME